Global Journal of Researches in Engineering, J: General Engineering, Volume 22 Issue 1

lobal Journal of Researches in Engineering ( ) Volume XxXII Issue I Version I J G 22 Year 2022 © 2022 Global Journals Mathematical Models for the Calculation of the Thermal Properties of PVCs as a Function of Dosage with the Load of Palm Kernel Shell Powder from the Results of Experimental Practice Formulations et caractérisations . (U. F.–S. 1-, Éd.) Matériaux Polymères, Thèse de doctorat.URI/URL: http://dspace. univ setif.dz :8888/jspui/handle/123 456789/1045 5. ADEOSUN, Samson Oluropo, USMAN, Mohammed Awwalu, AKPAN, Emmanuel Isaac, et al., ( 2014), Characterization of LDPE reinforced with calcium carbonate—fly ash hybrid filler. JMMCE 2014; 2(4): 334––345. URI: https://ir.unilag.edu.ng/handle/ 123456789/7090 6. Kong, Q., Tang, Y., Hu, Y., Song, L., Liu, H., & Li, L., (2011), Thermal stability and flame retardance properties of acrylonitrile-butadiene-styrene /polyvinyl chloride/ organophilic Fe-montmorillonite nanocomposites. Journal of Polymer Research, 19(1). doi:10.1007/s10965-011-9751-y 7. Khan, T., Hameed Sultan, M.T.B. and Hamdan Ariffin, A., (2018), The Challenges of Natural Fiber in Manufacturing, Material Selection, and Technology Application: A Review. Journal of Reinforced Plastics and Composites, 1-10. https://doi.org/ 10.1177/0731684418756762 8. Djomi, R., Meva’a, L., Nganhou, J., Mbobda, G., Njom, A., Bampel, Y. and Tchinda, J., (2018), Physicochemical and Thermal Characterization of Dura Palm Kernel Powder as a Load for Polymers: Case of Polyvinyl Chloride. Journal of Materials Science and Chemical Engineering, 6, 1-18. https:// doi.org/10.4236/msce.2018.66001. 9. Djomi, R., Fokam, C.M., Biyeme, F., Mveh, C.M., Olembé, R.,Ntede, H. and Atangana, A., (2021), Indus-trial Elaboration by Extrusion of PVC Tubes Loaded with Micronized Dura Palm Kernel Shell Powder. Journal of Materials Science and Chemical Engineering, 9, 41-69. https://doi.org/10.4236/msce. 2021.910004. 10. SOFAMAC: Société de Fabrication des Matériaux de Construction et Plastiques ; SOA – Yaoundé; Cameroun; https://www.sofamac.com 11. Dansuk Industrial Ltd. Co. (2017-2018). Industrial Complex’ Head Office: 705.1DA-SHIHWA 12. Yves Roland Olembe, Christian BOPDA Fokam, Théodore Tchotang, Rolland Djomi, Bienvenu Kenmeugne & Marc Louis Maurice François, (2021) Investigation of the Physical, Mechanical and Chemical Properties of the Marrow of Raffia Hookeri, Journal of Natural Fibers .https://doi.org/ 10.1080/15440478.2021.1961337. 13. R Djomi, et. al., (2021),"Thermo-physical and chemical characterization of the clay resulting from the mechanical treatment of the clayey ground: case of the clayey ground of the area of Nomayos - Yaoundé - Cameroon." IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 18(4), pp. 43- 53.14. DOI: 10.9790/1684-1804034353 14. Djidjelli, H. M.-V.-J., (2002), Effect of wood flour content on the thermal, mechanical and dielectric . properties of poly(vinyl chloride) (Vol. 287(9)). Macromolecular Materials and Engineering.doi:10. 1002/1439 2054 (20020901)287 :9<611 15. Taha, T.A., Ismail, Z. & Elhawary, M.M., (2018), Structural, optical and thermal characterization of PVC/SnO 2 nanocomposites. Appl. Phys. A 124, 307. https:/ /doi.org/10.1007 / s00339-018-1731-1 16. F. Gong, M. Feng, C. Zhao, S. Zhang and M. Yang,(2004), “Thermal Properties of Poly(vinyl Chloride)/Montmorillonite Nanocomposites,” Polymer Degradation and Stability, Vol. 84, No. 2, pp.289 294.doi:10.1016/ j. polymdegradstab.2003. 11.003 17. Nassiopoulos, E. e. Thermo-mechanical performance of poly (lactic acid)/flax fibre-reinforced biocomposites. Materials and design, 66 , 473–485. 18. Radhakrishnan Nair, M.N., Thomas George, V. and Gopinathan Nair, M.R., (2007), Thermogravimetric Analysis of PVC/ELNR Blends. Polymer Degradation and Stability, 92, 189-196. https://doi.org/10.1016/ j.polymdegradstab.2006.11.014 19. Abdul Khalil, H.P.S., Tehrani, M.A., Davoudpour Y., Bhat A.H., Jawaid M. and Hassan, A., (2013), Natural Fiber Reinforced poly (vinyl chloride) Composites: A Review. Journal of Reinforced Plastics and Composites, 32,330-356. https:// doi.org/10.1177/0731684412458553 20. Corbet, C.,(1995), Mémotech — matières plastiques. Paris, Casteilla. https://doi: (ISBN 2-7135-1470-3) 21. J-P.TROTOGNON, J.VERDU, A.DOBRACZYNSKI, M.PIPERAUD,(09/2007), Précis de matières plasti- ques Structures-propriétés, mise en œuvre, normali- sation. Edition: Nathan/Afnor, Collection: Précis 22. Ferda Mindivan, Meryem Göktaş, Ali S. Dike, (2020), Mechanical, thermal, and micro- and nanostructural properties of polyvinyl chloride/graphene nanoplatelets nanocomposites, Volume41, Issue9, Pages 3707-3716. https://doi.org/10.1002/pc.25669 23. Khoshnoud, P., & Abu-Zahra, N., (2016), Properties of rigid polyvinyl chloride foam composites reinforced with different shape fillers. Journal of Thermoplastic Composite Materials, 30(11), 1541– 1559. doi:10.1177/0892705716646417 24. Jean-Louis Fanchon, (2001), Guide de mécanique: Sciences et technologies industrielles, édition Nathan, ISBN 10: 2091789658ISBN 13: 97820917 89651, Paris, France.