Global Journal of Science Frontier Research, G: Bio-Tech & Genetics, Volume 22 Issue 2

19. Mohamed, J., C., I., Ottaviano, A., Ernesto, U. J., &Nasko, T. (2018). Thermowood® vs Termovuoto process – comparison of thermally modified timber in industrial conditions . Paper presented at the European Conference on Wood Modification 2018. 20. Moubarik, A., Pizzi, A., Allal, A., Charrier, F., & Charrier, B. (2009). Cornstarch and tannin in phenol–formaldehyde resins for plywood production. Industrial Crops and Products, 30 (2), 188-193. 21. Nautiyal, I. (2015). Suitability of Combination Plywood from Melia composita and Populus deltoides and Effect of Curing Pressure on Their Glue Shear Strength Ismita Nautiyal and Shilpa Gautam. Journal of Tree Sciences, 34 (2), 47-51. 22. Pelit, H., Sönmez, A., & Budakçı, M. (2015). Effects of thermomechanical densification and heat treatment on density and Brinell hardness of Scots pine (Pinus sylvestris L.) and Eastern beech (Fagus orientalis L.). Bio Resources, 10 (2), 3097-3111. 23. Sandberg, D., Kutnar, A., & Mantanis, G. (2017). Wood modification technologies-a review. iForest- Biogeosciences and Forestry, 10 (6), 895. 24. Sedliacik, J., Bekhta, P., & Potapova, O. (2010). Technology of low-temperature production of plywood bonded with modified phenol- formaldehyde resin. Wood Res, 55 (4), 123-130. 25. Soukphaxay, K., Phonetip, K., Boupha, L., Saetern, L., Khammanivong, K., & Fu, Y. (2021). Mechanical Properties Assessment of Laminated Veneer Lumber from Teak Plantation in Laos. Walailak Journal of Science and Technology (WJST), 18 (2), 6539 (6536 pages)-6539 (6536 pages). 26. Standard, A. N. Z. (2012). Plywood-Stucture. In AS/NZS 2269.0:2012 . New Zealand. 27. Sutiawan, J., Hermawan, D., Massijaya, M. Y., Kusumah, S. S., Lubis, M. A. R., Marlina, R., et al. (2021). Influence of different hot-pressing conditions on the performance of eco-friendly jabon plywood bonded with citric acid adhesive. Wood Material Science & Engineering , 1-10. 28. Uribe, B. E. B., & Ayala, O. A. (2015). Characteriza- tion of three wood species (Oak, Teak and Chanul) before and after heat treatment. Journal of the Indian Academy of Wood Science, 12 (1), 54-62. doi: 10.1007/s13196-015-0144-4 Physical and Mechanical Properties of Teak (Tectona Grandis L.Fil.) Thermo-Plywood from Plantations in Lao P.D.R © 2022 Global Journals 1 Year 2022 84 Global Journal of Science Frontier Research Volume XXII Issue ersion I VII ( G )